Schüco bifold door repair.
We regularly assess Schüco systems for roller, hinge, lock and seal issues. We trace the fault through the complete doorset before specifying a compatible repair.
Positioning
Schüco is a German aluminium systems manufacturer. Its folding ranges include the older ASS 70 FD and newer AS FD platforms, made through approved partners and used in high-performance aluminium doorsets with engineered running gear and weather seals.
Schüco ASS 70 FD running gear, frame adjustment and moving gaskets — what we see most on Schüco doorsets
The ASS 70 FD carries the panels through roller assemblies at the threshold, and those rollers are not treated as a simple adjustment point. Frame-side adjustment profiles and structural expansion details provide the designed correction range, so wear in the roller assembly must not be hidden by repeated ad-hoc adjustments.
Schüco maintenance guidance gives the seals a specific treatment: gaskets are kept supple with a grease stick or suitable treatment, while the locking cylinder has its own lubrication requirement. The bottom track should be vacuumed, and excess lubricant should not be left to collect dirt around the roller assemblies.
The ASS 70 gasket arrangement is designed to move away from the frame as the door opens. A seal that stays displaced, marks the frame or no longer compresses evenly needs to be distinguished from a gasket that is performing its intended movement.
Some older setups can show uneven lock-side frame lines where a floating vertical divider is absent. We record the actual setup and check panel alignment, installation and locking alignment rather than assuming the newer AS FD details apply to an older ASS doorset.
How the assessment supports the right repair.
The assessment follows nine connected stages, from reviewing the doorset’s history and measuring its condition to checking operation, components and manufacturer tolerances. The findings give us a clear basis for an accurate quotation.
We start with the background and history of the doorset, then take extensive measurements for distortion and check the frame for square and twist. We test operation under load, check drainage paths, and inspect glazing, gaskets and packers. Where parts are involved, components and part numbers are verified against the manufacturer, and every measurement and observation is cross-checked against the manufacturer's recommended tolerances. After that cross-check, we provide an accurate quotation based on the assessment findings.
The full process is set out stage by stage on our How it works page.
Open the assessment processWhat we assess
- Fractured or damaged hinges
- Broken, worn, or disconnected rollers
- Dragging, dropped, or misaligned panels
- Panels catching the threshold or header
- Difficult closing or locking
- Faulty locks, cylinders, handles, keeps, tracks, guides, and seals
How the assessment supports lasting performance
Pro-Lock assesses the complete doorset and recommends repairs with the aim of returning it to operation as intended by the manufacturer. Understanding how the panels, running gear, seals, locks and frame work together helps reduce unnecessary strain on connected components, support reliable operation and minimise repeat repairs over the long term.
An experienced engineer assesses the complete bifold doorset, talks you through the findings on site, and provides a written report with a quotation for any recommended repairs.
The findings are followed by a comprehensive report and itemised quotation by email, with repairs arranged separately. No repair work is carried out during the assessment.
The £79 fee covers a professional bifold-door assessment of the complete doorset. £79 professional assessment, credited against any repair, or refunded if we cannot quote. 12 month warranty on completed repair work.
You do not need to identify your doorset first.
You do not need to identify your doorset before getting in touch. Many bifold doors are unbranded or contain a combination of components from different manufacturers. Identifying the system, cross-checking component and part availability, and sourcing suitable parts through our established European network of suppliers is our job. Pro-Lock regularly repairs bifold door systems that other repairers have classed as obsolete, where a suitable repair route can be identified.
Warranty
All work carried out is backed by our market-leading 12 month warranty, covering our workmanship and any parts supplied and fitted as part of the repair where applicable.
Recent repairs on Schüco doors
A three-panel aluminium Schüco doorset in Rochester was assessed after daylight was visible through the door and a gap appeared at the top, with alignment and damaged gasket issues identified. See the Rochester repair ↗
A three-panel aluminium Schüco doorset in Fen Ditton was assessed with doors not closing properly and a loose handle, requiring panel realignment, servicing and handle backplate attention. See the Fen Ditton repair ↗