External bifold doors folded back along a bright garden patio

Two external bifold doors can look almost identical from the garden, yet carry their weight in completely different ways. One may run on rollers in the bottom track, while another hangs from roller trolleys in the head track.

That difference matters when a door starts dragging, dropping or resisting movement. The track that appears to be the problem may only guide the panels; the cause could be elsewhere in the running gear, its fixings or the frame supporting it.

Identifying the running system before adjusting anything is essential to making the right diagnosis. Pro-Lock assesses external bifold doors made from uPVC, aluminium, timber or hybrid materials. We do not repair internal bifold doors such as wardrobe, cupboard or room-divider doors.

First question: which track carries the panels’ weight?

The visible tracks are useful clues, but their position alone does not confirm how a doorset is supported. The key distinction is whether the panel weight rests on the floor-level rollers or hangs from overhead trolleys.

Bottom-rolled: weight carried at the threshold

In a bottom-rolled system, rollers beneath the panels travel along the bottom track. The panels’ weight is transferred down through those rollers and the threshold. A top guide helps keep the panels upright and following the correct path; it does not carry their weight.

If a bottom-rolled door drags, the rollers, track, pivots, panel alignment and threshold all need to be considered together. A problem that looks like a track fault may instead be a worn roller or a panel sitting out of line.

Top-hung: weight carried overhead

In a top-hung system, trolleys or hangers attached to the panels run within the head track. That overhead running gear carries the panel weight. A floor guide, or a bottom track that may look substantial, helps control panel movement but is not necessarily load-bearing.

Here, the condition and support of the head track and frame are important parts of the diagnosis. A worn trolley is one possible cause of poor movement, but a specialist also needs to check its engagement, fixings and the alignment of the doorset.

The distinction sounds simple. In practice, different manufacturers and configurations use different hardware, so a visual guess is not a reliable basis for adjustment or ordering parts.

Why the diagnosis changes with the running gear

The same symptom can point to different components depending on where the door’s weight is carried.

For example, a panel that appears to have dropped might suggest a bottom roller or pivot problem on one system, but a top trolley, hanger or head-track issue on another. Likewise, scraping at the floor does not automatically mean the threshold track is at fault: the panel may have shifted because another part of the running system is worn or out of position.

This is why the Pro-Lock team checks how the panels are supported and move as a complete set before recommending work. Replacing or adjusting the wrong component can leave the underlying fault untouched.

What faults can look like on a bottom-rolled door?

When the running rollers are below the panels, wear or damage in that area can affect panel height and how smoothly the door moves.

Typical signs include:

  • Dragging or scraping at the threshold: a worn, seized or damaged roller may not travel smoothly, or the panel may be sitting out of alignment.
  • A panel sitting lower than its neighbour: the roller, pivot or connected support hardware may need assessment.
  • Uneven movement along the opening: the running gear may be damaged, poorly seated or affected by a track or fixing issue.
  • A door that catches as it folds: pivots, guides and hinges may be pulling the panels out of their intended path.

The right repair depends on the source of the fault. A serviceable track does not necessarily need work simply because movement feels rough; the roller or another linked component may be responsible.

Close detail of the bottom track and rollers beneath an external bifold door panel

What faults can look like on a top-hung door?

With a top-hung system, attention turns to the overhead trolleys and the track in which they run, as well as the parts that guide the panels below.

Possible symptoms include:

  • Resistance or uneven travel: a trolley wheel, bearing or hanger may be worn, damaged or not running freely.
  • A panel that appears loose at the top: the trolley, its attachment or the way it engages with the track needs checking.
  • Panels that move out of line while folding: the top running gear, pivots, guides or frame geometry may be affecting the panel path.
  • A door that runs poorly despite a sound floor guide: the lower guide may be doing its job, while the load-bearing issue is overhead.

A top-hung arrangement relies on the head track and its support. A specialist therefore checks the track and its fixings as well as the moving components. The goal is to establish whether the fault lies in the running gear, its engagement, the surrounding support or more than one part of the system.

Top-hung roller trolley running in the head track of an external bifold door

What a specialist checks before recommending a repair

A useful assessment goes beyond naming the apparent fault. It considers how the whole doorset behaves, from the first panel to the last.

The Pro-Lock team will typically look at:

  • Running system and load path: which components carry the panel weight, and which simply guide movement.
  • Rollers, trolleys and bearings: whether wheels turn freely, sit correctly and show signs of wear or damage.
  • Tracks and fixings: whether the running surfaces and their attachments are in suitable condition.
  • Pivots, hinges and guides: whether linked hardware is allowing panels to travel and fold as intended.
  • Panel position and frame geometry: whether the doorset is aligned and whether the frame’s condition is affecting movement.
  • The operating cycle: how each panel moves when the doors are opened, folded and closed, rather than relying only on a stationary visual check.
  • Component compatibility: the system and hardware type, so any recommended parts are suited to the doorset.

These checks help distinguish a worn component from a symptom caused by misalignment or a related support issue. They also help establish whether an adjustment, repair or compatible replacement part is an appropriate route.

Avoid forcing a stiff or binding door. Extra strain can be transferred through connected rollers, hinges and guides, making the original fault harder to assess.

Why a quick visual guess can lead to the wrong fix

A bottom track can be prominent on both types of doorset, but that does not mean it carries the panels’ weight in every case. Equally, visible hardware near the head does not on its own prove that the door is top-hung.

A specialist identifies the arrangement by examining how the panels are connected to the running gear and how the load is supported. That matters when selecting parts: rollers, hangers and guides are not universal, and a component that looks similar may not be suitable for the system or its working load.

If a door has started dragging or feels heavy, describe when the problem occurs and which panels are affected. Photos can provide useful context, but they do not replace an on-site assessment of the moving doorset.

Local external bifold door repair

Pro-Lock provides external bifold door repairs and servicing across Norfolk, Suffolk, Cambridgeshire, Bedfordshire, Essex, Hertfordshire, Surrey, Kent, East Sussex, West Sussex (Worthing and the coastal areas around Chichester Harbour), Lincolnshire, Northamptonshire, Leicestershire, Berkshire, Hampshire, Oxfordshire and Buckinghamshire.

For local information, see our pages covering bifold door repair in Berkshire, bifold door repair in Hampshire and bifold door repair in Oxfordshire. You can also find details about bifold door repairs in Reading, bifold door repairs in Southampton and bifold door repairs in Oxford.

Running gear is not the same on every doorset, so the assessment always starts with the system in front of us rather than a generic checklist.

Hinge and guide hardware being inspected on an external bifold door

A clear assessment, report and quotation

The Pro-Lock assessment fee is £79. It is credited against the repair cost if you proceed, and refunded if suitable parts cannot be sourced or the doorset is beyond economical repair. Following the assessment, you receive a written report and quotation setting out the findings and recommended work.

Repairs are covered by a full 12-month warranty.

To learn more, read how the assessment works, explore our bifold door services, visit the FAQs or check the full areas we cover.

Arrange an assessment

If your external bifold door is dragging, dropping or resisting movement, contact the Pro-Lock team and tell us what you have noticed.

✅ Call 0330 311 0975
✅ Email enquiries@bifold-door-repair.co.uk
✅ Message Pro-Lock on WhatsApp
✅ Send an enquiry