External bifold doors opening onto a bright patio, with the panels, frame and threshold clearly visible

When cold weather brings sticking panels, draughts or a lock that will not engage, replacing the whole doorset can seem like the simplest solution. But winter symptoms often point to a smaller fault: worn rollers, panel misalignment, tired seals or a track that needs attention.

At Pro-Lock, we repair external bifold doors rather than sell new ones. That means our advice is focused on the condition of your existing doorset and whether it can be restored, not on selling you a replacement.

Before deciding, here is what a repair specialist would check first.

Why bifold door problems become more obvious in winter

Cold weather, wind and rain can make existing faults harder to ignore. Seals may have become worn or compressed, while seasonal changes can affect how panels sit and meet. A door that has been used less often may also feel stiff when you start opening it regularly again.

The important point is that a symptom does not, by itself, prove the doorset has reached the end of its life. A specialist needs to check how the panels, frame, running gear, seals and locking points work together.

Symptoms that often have a repairable cause

1. A panel drags or catches the threshold

Scraping at the bottom of a panel can be a sign that it has dropped or moved out of alignment. Worn rollers, hinges or guides may also affect how it travels.

A repair assessment checks panel height and position, the condition of the running gear, and whether the track is clear and sound. Depending on the findings, the remedy may involve realigning the panel, adjusting the mechanism or replacing a worn component, not replacing every door.

Close-up of an external bifold door roller moving along its bottom track

2. One corner sits lower than the others

A dropped corner can make a panel rub, leave uneven gaps or make the lock harder to engage. On some systems, glazing support can affect the panel’s shape and position. A specialist may therefore check how the glass is supported, alongside the hinges, rollers and frame.

One relevant glazing method is called toe and heel. Manufacturer-specific packers help keep the panel square and level. It is one part of a broader diagnosis, not a catch-all explanation for every alignment problem.

3. The doors are stiff or awkward to fold

Bifold doors are heavy, connected systems. Stiff movement may result from worn or disconnected rollers, damaged hinges, a dirty track or another component under strain.

A specialist should test the doorset through its full opening and closing movement, rather than judge it from a single panel. Pro-Lock assesses the related parts together to identify the cause and recommend a suitable repair.

Detail of external bifold door running gear and hinge hardware

4. You feel a draught or notice failed seals

Flattened, split or displaced seals can let cold air through. But a draught can also happen when a panel is out of position and no longer presses evenly against its seals.

That is why fitting new seals without checking alignment may not solve the problem. The assessment should consider the seals, panel position and closing pressure together. Where the seals have failed, replacing them with a compatible profile can help restore a better seal around the doorset.

5. The handle turns, but the door will not lock smoothly

If the locking points no longer line up, the cause may lie in the panel position, keeps, hinges or locking hardware. Forcing the handle can put extra strain on the mechanism. A repair specialist checks the lock line and connected parts to establish whether adjustment or a compatible replacement component is needed.

What should a repair specialist check before recommending replacement?

A proper assessment looks beyond the most obvious symptom. The Pro-Lock team checks the complete doorset, including:

  • Panel movement and alignment: Do the panels fold and meet correctly?
  • Rollers, hinges and guides: Are they worn, damaged, disconnected or under strain?
  • Track and threshold: Is the track damaged, obstructed or affecting panel travel?
  • Frame geometry: Is the frame square and within the relevant manufacturer tolerances?
  • Glazing support: Is the panel correctly supported where appropriate?
  • Seals and closure: Are the seals sound, and are they compressed evenly?
  • Locks and keeps: Do the locking points engage correctly?
  • Drainage: Are the intended routes for water clear?

This whole-system approach matters because a fault in one place can affect movement, weather sealing and security elsewhere. Find out how the Pro-Lock assessment works or read about our external bifold door repair services.

When replacement may genuinely be the right option

Repair is not always suitable. A specialist may find that the doorset is beyond economical repair because of severe frame distortion, extensive timber damage, seriously corroded or damaged structural sections, or parts that cannot be sourced. A repair may also be hard to justify if substantial faults keep returning despite appropriate work.

The decision should come after the condition and available repair options have been assessed. Ask for a written explanation of what has failed, which parts are affected, and why repair is or is not a sensible option. Because Pro-Lock does not sell new doors, our advice is not tied to a replacement sale.

A repair-first assessment, with clear terms

The Pro-Lock assessment fee is £79. You receive an assessment of the doorset and a written report and quotation for any recommended repair.

✅ If you proceed with the repair, the £79 assessment fee is credited against the repair cost.
✅ If suitable parts cannot be sourced or the doorset is beyond economical repair, the fee is refunded.
✅ Repairs are covered by a full 12-month warranty.

The warranty covers our workmanship and parts supplied and fitted as part of the repair, where applicable. You can also review our frequently asked questions before arranging an assessment.

External bifold door repair across 17 counties

We repair external bifold doors made from uPVC, aluminium, timber and hybrid materials. We do not repair internal bifold doors, such as wardrobe, cupboard or room-divider doors.

Our service covers Norfolk, Suffolk, Cambridgeshire, Bedfordshire, Essex, Hertfordshire, Surrey, Kent, East Sussex, West Sussex, Lincolnshire, Northamptonshire, Leicestershire, Berkshire, Hampshire, Oxfordshire and Buckinghamshire. In West Sussex, our coverage includes Worthing and the coastal areas around Chichester Harbour.

For local information, see:

Explore all Pro-Lock service areas to check coverage elsewhere.

Get a clear answer before you replace

If your doors drag, feel stiff, let in a draught or are difficult to lock, do not force them or assume the complete doorset must go. A specialist assessment can identify whether a practical repair will restore smooth movement and help prolong the life of your existing doors.

✅ Call Pro-Lock on 0330 311 0975
✅ Email enquiries@bifold-door-repair.co.uk
✅ Arrange an assessment or message Pro-Lock on WhatsApp

External bifold doors connecting a home to a bright garden deck